Shuoertai Logo

3C Electronics

ST-P Series Laser Displacement Sensor for Height Measurement of Smartphone Camera Modules

For mobile camera-module assembly height inspection, this article explains how to compare lens-barrel, bracket, and datum heights with an ST-P sensor while managing small-target positioning, curved-surface reflection, and station-to-station consistency.

ST-P Series Laser Displacement Sensor for Height Measurement of Smartphone Camera Modules

Background

This article introduces the application of ST-P series laser displacement sensors in height measurement of smartphone camera modules, covering detection requirements, measurement challenges, sensor selection, installation methods, and selection considerations, providing a high-precision non-contact measurement solution for 3C electronics manufacturing.

Pain Points

  • • Lens barrels, metal brackets, and black plastic parts differ strongly in color and reflectance, while curved or sloped surfaces can direct returned light away from the receiver.
  • • The module is small and its assembled position varies, so a fixed point can land on lens curvature, a barrel edge, or an adhesive area.
  • • Height must be referenced to a defined housing or fixture datum; an absolute distance alone can convert whole-part motion into a false assembly-height change.
  • • Lenses and sensor windows are sensitive to dust, and the production optical path must remain clear of fixture walls and other occlusions.

Measurement Solution

Industry Background With the development of smartphone camera modules towards multi-camera, high-pixel, and miniaturization, the height consistency of camera modules directly affects imaging quality and assembly yield. During module assembly, precise height measurement of components such as lenses, filters, and sensors is required to ensure compliance with design tolerances. Traditional contact measurement methods are inefficient, prone to damaging components, and cannot meet the demand for online full inspection. Non-contact laser displacement sensors, with advantages such as high precision, fast response, and non-destructive measurement, have become an ideal choice for height measurement of camera modules.

Detection Requirements Height measurement of smartphone camera modules mainly targets the following objects: Height difference between lens and base Installation height of filter Surface height of image sensor chip Overall flatness of the module Detection purpose: Ensure that the height of each component is within the specified tolerance range, avoiding imaging blur, focus issues, or assembly interference caused by height deviation. Typical accuracy requirements are at the micron level, with repeatability within 0.5 μm.

Measurement Challenges Highly reflective surfaces: Lens coatings, metal bases, and other surfaces have strong reflectivity, which can cause diffuse reflection interference and affect measurement stability. Small dimensions: Camera modules are small in size with dense measurement points, requiring a small spot size and precise positioning. High-speed production line: Fast production line cycle times require high sampling frequency and fast response from the sensor. Environmental interference: Vibration, temperature changes, etc., on the production line may affect measurement accuracy. Recommended Sensor Solution The ST-P series laser displacement sensor uses laser triangulation for non-contact measurement, suitable for precision detection in 3C electronics.

Based on installation distance and accuracy requirements, the following models are recommended: Model | Reference Distance | Measurement Range | Repeatability | Linearity Error | Application Scenario ST-P25 | 25 mm | ±1 mm | 0.05 μm | <±0.6 μm | High precision, small range height measurement ST-P30 | 30 mm | ±5 mm | 0.15 μm | <±3 μm | Medium precision, larger range ST-P50 | 50 mm | ±10 mm | 0.25 μm | <±4 μm | General-purpose height measurement ST-P80 | 80 mm | ±15 mm | 0.5 μm | <±6 μm | Larger installation distance ST-P150 | 150 mm | ±40 mm | 1.2 μm | <±16 μm | Long distance, large range measurement For height measurement of camera modules, ST-P25 or ST-P30 are recommended due to their high repeatability and small spot size, suitable for precision measurement. If installation space is limited or multiple points need to be measured simultaneously, ST-P50 can be considered.

Implementation Method Installation Method The sensor is installed vertically above the module to be measured, fixed to the production line machine via a bracket. Ensure the sensor axis is perpendicular to the measured surface to avoid measurement errors caused by tilting. For highly reflective surfaces, the sensor angle can be adjusted (e.g., within 15°) to reduce specular reflection interference. Measurement Process The production line conveyor brings the camera module to the inspection station, triggering the sensor to start measurement. The sensor emits a laser beam, receives the reflected light, and calculates the distance using triangulation. Data is transmitted in real-time via Ethernet or RS485 to an upper computer or PLC for height calculation and judgment. The result is fed back to the actuator to reject or mark defective products.

Signal Output The ST-P series supports Ethernet, RS485, analog, and IO outputs, allowing flexible connection to PLCs, upper computers, or vision inspection systems. Analog output (4-20 mA or 0-10 V) is suitable for fast analog signal transmission, while digital interfaces facilitate data recording and analysis. Selection Considerations Accuracy and range: Select a model with appropriate repeatability and measurement range based on the height tolerance of the measured object. Camera module height tolerance is typically within ±10 μm, so repeatability better than 0.2 μm is recommended. Installation distance: Choose the reference distance based on site space to avoid interference. Surface characteristics: For highly reflective or transparent surfaces, sample testing is required to verify measurement stability. Blue laser or polarizing filters may be used if necessary.

Sampling frequency: For fast production line cycles, select a high-speed sampling model (e.g., 160 kHz) to ensure multi-point measurement per module. Environmental adaptability: Consider temperature drift, vibration, etc., and choose a sensor with temperature compensation. Application Value Improved yield: Real-time detection of height deviation allows timely adjustment of process parameters, reducing defective products. Increased efficiency: Non-contact measurement, no contact with components, fast detection speed, suitable for online full inspection. Data traceability: Measurement data output via Ethernet enables digital traceability of the production process. Cost reduction: Reduces manual sampling and rework costs, improving production line automation.

Precautions For highly reflective metal or glass surfaces, sample testing is recommended to confirm sensor stability and accuracy on the target surface. Black plastic or FPC flexible board surfaces have strong light absorption; adjust laser power or choose an appropriate model. Transparent materials (e.g., filters) may cause multiple reflections; special algorithms or angled installation may be required. Avoid strong vibration or temperature changes during installation; add protective covers if necessary. Regularly clean the sensor lens to prevent dust from affecting measurements.

Recommended ST-P model parameters
ModelReference DistanceMeasuring RangeRepeatabilityLinearity Error
ST-P2525 mm±1 mm0.05 μm<±0.6 μm
ST-P3030 mm±5 mm0.15 μm<±3 μm
ST-P5050 mm±10 mm0.25 μm<±4 μm
ST-P8080 mm±15 mm0.5 μm<±6 μm
ST-P150150 mm±40 mm1.2 μm<±16 μm

Technical Advantages

  • • Non-contact measurement does not load the lens barrel or lens and can inspect relative module height after assembly.
  • • Acquiring datum and module points in the same positioning cycle supports differential measurement that reduces fixture-height variation.
  • • Vision alignment or a repeatable fixture keeps the spot on the specified plane, while real barrel materials establish mounting direction and signal stability.
  • • ST-P communication outputs send height and decision data to a PLC or host for assembly feedback, sorting, and lot traceability.

Featured Products